Graphic version of this page

ClickFit Range

Technology: Pitched Roof Installation Kit

Type: Pitched Roof Installation kit

Models: ClickFit for Roof Tiles

Website: More Info

About this Product

PV Mounting System

Back to product search

Range of Permissible Roof Pitch (degrees) >17.5
Compatible Roof Coverings Tiled roofs with wooden substructure
Roofing Substrate
For certified wind uplift resistance in sound timber
Min rafter size (hxw mm) Min batten size (hxw mm)
150 mm x 55 mm 46 mm x 21 mm
Further notes on fixing (where relevant) Tiles may need to be ground in accordance with manufacturer instructions to ensure satisfactory fitting of mounting hooks.
Maximum Design Wind Uplift
Calculated by dividing the characteristic wind uplift by the partial safety factor shown below
1.72kPa for arrays using 4 roof hooks per 1.6m x 0.8m panel 1.38kPa for arrays using 3 roof hooks per 1.6 x 0.8m panel
Partial (safety) factor(s) 1.1
Fire Classification BS476-3:2004 EN 13501-5:2005+A1 :2009
N/A N/A
Limitations on Fire Classification This kit is suitable for:
Above roof installations over non-flammable outer roof covering only