Graphic version of this page

Standard System

Technology: Pitched Roof Installation Kit

Type: Pitched Roof Installation kit

Models: Standard System

Website: More Info

About this Product

Roof hook based pitched roof installation kit for tiles

Back to product search

Range of Permissible Roof Pitch (degrees) >17.5
Compatible Roof Coverings Tiled roofs with wooden substructure
Roofing Substrate
For certified wind uplift resistance in sound timber
Min rafter size (hxw mm) Min batten size (hxw mm)
Attachments including minimum timber sizes must be in accordance with Schletter's guidance document "Edge distances of wood screwings" Attachments including minimum timber sizes must be in accordance with Schletter's guidance document "Edge distances of wood screwings"
Further notes on fixing (where relevant) Tiles may need to be ground in accordance with manufacturer instructions to ensure satisfactory fitting of mounting hooks.
Maximum Design Wind Uplift
Calculated by dividing the characteristic wind uplift by the partial safety factor shown below
Values are based on 4 roof hooks per m2 of solar panel Roof Pitch 45degrees as per standard. Values for other pitches is available from Schletter Standard family roof hooks Uplift resistance (kPa) Universal 2.76 Eco G 1.96 Eco V 2.16 Roof Hook EcoS Extr
Partial (safety) factor(s) 1.5
Fire Classification BS476-3:2004 EN 13501-5:2005+A1 :2009
N/A N/A
Limitations on Fire Classification This kit is suitable for:
Above roof installations over non-flammable outer roof covering only