Graphic version of this page

Standing Seam Clamps

Technology: Pitched Roof Installation Kit

Type: Pitched Roof Installation kit

Models: Standing Seam Clamps

Website: More Info

About this Product

Clamp based mounting system for standing seam metal roofs

Back to product search

Range of Permissible Roof Pitch (degrees) >5
Compatible Roof Coverings Metal roofs with standing seams
Roofing Substrate
For certified wind uplift resistance in sound timber
Min rafter size (hxw mm) Min batten size (hxw mm)
N/A N/A
Further notes on fixing (where relevant) Specific clamps to be used on standing seam type defined by Schletter.
Maximum Design Wind Uplift
Calculated by dividing the characteristic wind uplift by the partial safety factor shown below
Values are based on 4 roof hooks per m2 of solar panel Roof Pitch 45degrees as per standard. Values for other pitches is available from Schletter Standing seam clamp type Part No. Uplift resistance (kPa) Seam Clamp 503 2.4 Seam Clamp 510 KalZip 112002-00
Partial (safety) factor(s) 1.5
Fire Classification BS476-3:2004 EN 13501-5:2005+A1 :2009
N/A N/A
Limitations on Fire Classification This kit is suitable for:
Above roof installations over non-flammable outer roof covering only