Graphic version of this page

FixT

Technology: Pitched Roof Installation Kit

Type: Pitched Roof Installation kit

Models: FixT

Website: More Info

About this Product

Through bolt based mounting system for trapezoidal metal profile roofs

Back to product search

Range of Permissible Roof Pitch (degrees) >7.5
Compatible Roof Coverings Trapezoid metal profile roofs over wood or metal sub-structures
Roofing Substrate
For certified wind uplift resistance in sound timber
Min rafter size (hxw mm) Min batten size (hxw mm)
Attachments including minimum timber sizes must be in accordance with Schletter's guidance document "Edge distances of wood screwings" Attachments including minimum timber sizes must be in accordance with Schletter's guidance document "Edge distances of wood screwings"
Further notes on fixing (where relevant) 10 indicates fixed with Wood screw 10 depth leff = 60 mm
12 indicates fixed with Wood screw 10 depth leff = 60 mm
Maximum Design Wind Uplift
Calculated by dividing the characteristic wind uplift by the partial safety factor shown below
Values are based on 4 roof attachments per m2 of solar panel Roof Pitch 45degrees as per standard. Values for other pitches is available from Schletter FixT Upstand type Part No. Uplift resistance (kPa) FixT Size 1 S320 113004-000 4 2.6 FixT Size 3 S320
Partial (safety) factor(s) 1.5
Fire Classification BS476-3:2004 EN 13501-5:2005+A1 :2009
N/A N/A
Limitations on Fire Classification This kit is suitable for:
Above roof installations over non-flammable outer roof covering only